Water damage is one of the most insidious things to happen to a home. It can damage the structure, cause mold to grow, and make it smell. Common causes include flooding caused by rain or broken pipes, plumbing issues, water backflow, seepage, etc. The key to fixing water damage lies in quick response and eliminating sources of moisture. The more you wait, the worse it can get. It can even lead to health problems for you and your family. So, take a look at these tips for a quick response to a wet, stinky, and potentially dangerous situation in your home.
1. Get rid of mold
Moisture damage is one of the most common causes of expensive repairs in homes with older plumbing. It leads to mold growth around pipes and along walls, the roof, and the flooring. It’s not too hard to spot since it has a distinct color and odor. It’s usually black, greyish, greenish, but can also be orange and purple. The moment you spot it, get rid of it.
However, since it can be harmful to your health, it’s best not to take the DIY approach without protective equipment. Even better, call a mold remediation to take care of the disgusting menace. A professional can help you safely remove mold and address any moisture issues facilitating its growth. After the mold has been successfully removed, disinfect the place to ensure it doesn’t grow back.
2. Have your home inspected regularly
To avoid water damage scenarios, you should consider calling water damage experts to investigate your property every few months. Regular inspections can help you detect any potential problems before they lead to a significant disaster. In the long run, this will help you abate costly home renovation.
You can search for inspectors online. Run a Google search for water damage or plumbing experts in your neighborhood, or ask friends and family for recommendations.
3. Insulate exposed pipes to prevent freezing
Frozen water pipes can burst during winters and cause thousands of dollars’ worth of damage to your home. The solution to this winter menace is simple: insulate exposed pipes. Do this before winter kicks in.
Using a pipe insulation kit can save you the hassle of having to dig up your yard in the middle of winter. These kits include things like foam tubing and tape, designed with an R-value of around six per inch, making them one of the most effective ways to protect your pipes from freezing. If you don’t have an insulation kit, try wrapping the pipes on the outside with regular insulation material. This will prevent heat loss and help keep your home warm enough so that water doesn’t freeze.
4. Install water-leak detectors
A smart way to monitor leaks and prevent water damage is by installing a water-leak detector near or in an area where there is a high potential for a water leak to occur. Water-leak detectors are small devices that can detect water leaks and alert you when there’s an outflow. They are easy to install, affordable, and provide an extra level of security for your home against water damage.
A good place to install one is near the water heater since this is an area where most leaks tend to occur. The water heater is usually located in the basement, where leaks can go unnoticed. You can also connect one to the main water supply of your home. This way, you’ll be able to monitor leaks and your water consumption.
5. Keep the gutters clean
Keeping the gutters clean by removing leaves and debris is essential for home safety. Over time, leaves and other heavier debris can cause the lines to choke and prevent water from entering the sewage system. As a result, dirty water will flow backward into your home and cause problems inside. It can be challenging to clean up, cause mold to grow, and lead to health problems.
Ensure your gutters are clean before rainy seasons and fall because that’s when foliage tends to flow into the drainage. Keep the lids on and remove trash from around them. Also, avoid dumping waste in your gutters to prevent them from clogging.
6. Don’t throw trash in the sink or toilet
Likewise, avoid using your sink and toilet as a dustbin. Throwing in leftover food, toilet paper, sanitary products can clock your pipes and cause more water to flow backward. Clogging can damage the pipes and cause water to seep into the walls, roof, and floor.
Also, unclog your wink and toilets regularly. You can whip a quick home remedy by mixing water and baking soda or use commercial products to unclog drains. We recommend using environmentally friendly products.
7. Make sure the foundation is dry
A wet basement can wreak havoc. Therefore, keep this space dry at all times. Trying to prevent moisture from damaging your foundation starts with a good drainage system around the house. This is important because water that does not drain away from your home will eventually find its way inside, potentially causing significant problems.
There are several DIY maintenance steps you can take to protect your home’s foundation from moisture. These include caulking window frames, repairing cracks in stucco or brick facades, sealing gaps around pipes and drains, and cleaning gutters. Get a sump pump to be ready in the case of an emergency. But if the flooding is severe, immediately call a contractor specializing in foundation repair and waterproofing.
Water damage can be devastating for your home and bank balance. But if you are ready and can manage the problem before it gets too bad, you stand a much better chance at preventing substantial losses. So, be alert and follow the tips mentioned above to prevent water and moisture damage from ruining your property.